When batteries age and/or spend too much time in a discharged or abused state, sulphite crystals can form on the battery plates which impede the flow of electricity. This is the main cause of poor battery performance.
This unit uses a sharp pulse of current forced into the battery suddenly to “jar” the sulphite crystals and cause internal resonances, both mechanical and electrical, to grind down the sulphite crystals so they can be re-combined into the battery acid.
Features:
Single unit 12 to 48 V nominal systems
Adjustable pulse strength
0.0 Amp pulse to 10 amp pulse
LED to indicate unit operating
LED to indicate relative strength of battery
Adjustable on/off voltage
Can be adjusted to only operate when battery is near full
EXTREMELY low draw
Electrical Specifications:
Base Model: BD-2
Nominal battery voltages: (V) 12 - 48 V DC
Maximum Input: (V) 63 V DC
Maximum Pulse Current: (A) 10 amps
Range of Pulse Current: 0.0 Amps to 10 amps
Adjustable with small screwdriver
Range of On/Off Control: 0 V to 70 V
Adjustable with Voltmeter and small screwdriver
Self Consumption: < 0.05 ma from battery at full pulse
Effeciency: >96% over 20% pulse load
User Controls:
Pulse Current Magnitude
On/Off Voltage
LED Indicators
Unit Operating
Mechanical Specifications:
Weight: 0.3 lbs.
Size: 3" X 2" X 1.5"
Connections:
Power #16 AWG Flying Leads
Operating Temperature:
-40 to 60 deg. C
Humidity:
0 - 90% non-condensing